Freeverb3VST_Hibiki_Reverb
This effect is a stereo to stereo hall reverb and is based on the reverb algorithm of allpass FDN zita reverb and
Moorer's early reflection model. This effect is one of the best hall reverb effect in the Freeverb3_VST package.
Parameters
- DRY
- The level of the dry signal.
- EWET
- The level of the early reflection signal.
- ESEN
- The level of the early reflection signal which was send to the late reverberation.
- LWET
- The level of the late reverberation signal.
- EWID
- The stereo width of the early reflection.
- EFAC
- The room size of the early reflection.
- ETYP
- The early reflection type.
- SIZE
- The late reverb's room size.
- LTYP
- The late reverb's type.
- LFAC
- The late reverb's oversampling factor.
- LWID
- The stereo width of the late reverbetation.
- IDEL
- The length of the initial delay of the late reverb wet signal in ms.
- ELPF
- The cutoff frequency of the low pass filter of the early reflection signal.
- EHPF
- The cutoff frequency of the high pass filter of the early reflection signal.
- LLPF
- The cutoff frequency of the low pass filter of the late reverb signal.
- LHPF
- The cutoff frequency of the high pass filter of the late reverb signal.
- IDIF
- The strength of the input allpass diffusor.
- ADIF
- The strength of the allpass diffusor in the FDN loop.
- RT60
- The reverb time.
- XOL
- The low crossover frequency for the late reverb time.
- XOH
- The high crossover frequency for the late reverb time.
- RTLo
- The low frequency gain for the late reverb time.
- RTHi
- The high frequency gain for the late reverb time.
- LFO1
- The first frequency of the LFO in the FDN loop.
- LFO2
- The second frequency of the LFO in the FDN loop.
- LFOF
- The strength of the LFO in the FDN loop.
- SPN
- The frequency of the output chorus.
- WAN
- The length of the output chorus.
- SPNF
- The strength of the output chorus.
